WEDGE GATE VALVE ENEKOS PROF DU 50-400
Intended purpose: as a closing device in cold water supply systems with nominal bore diameter 50, 100, 150, 200, 250, 300, 400 mm.
Working medium: natural water used in cold water supply systems before and after processing, with residual chlorine content from 0.3 to 2.0 mg/l.
Leakage class А according to GOST Р 54808-2011 in both directions.
Upon installation working medium direction and spatial arrangement are non-relevant.
Nominal pressure PN 1.0 MPa (10 kgf/cm2); 1.6 MPa (16 kgf/cm2 )
Operating pressure, not above 1.0 MPa (10 kgf/cm2); 1.6 MPa (16 kgf/cm2 ).
Max. temp. of working medium: up to 50°C.
Housing material: cast iron ВЧ-40 according to GOST 7293-85, wedge – cast iron ВЧ40.
Sealing: EPDM, NBR.
Connection to pipeline:
Scope of supply:
With handwheel – basic arrangement, 000.
With telescopic extension, arrangement 000-01.
With electric actuator, arrangement 000-02.
High quality of products branded ENEKOS is confirmed by the manufacturer’s warranties.
Average service life of wedge gate valves - 50 years.
The manufacturer’s warranty - 5000 cycles or up to 10 years.
A specific feature of products branded ENEKOS is high level of quality complying with European standards for valves and fittings.
Replacement of outdated fittings with new modern ENEKOS products reduces accidents in water pipelines and facilitates uninterrupted supply of clean drinking water to people.
The quality management system of ENEKOS Group LLC as applied to design, development, production, sales, installation, and servicing of pipeline fittings complies with GOST ISO 9001-2011 (ISO 9001-2008).
Average service life of wedge gate valves - 50 years.
The manufacturer’s warranty - 5000 cycles or up to 10 years.
A specific feature of products branded ENEKOS is high level of quality complying with European standards for valves and fittings.
Replacement of outdated fittings with new modern ENEKOS products reduces accidents in water pipelines and facilitates uninterrupted supply of clean drinking water to people.
The quality management system of ENEKOS Group LLC as applied to design, development, production, sales, installation, and servicing of pipeline fittings complies with GOST ISO 9001-2011 (ISO 9001-2008).